High Pressure Nylon Tubings
Available sizes :
3 mm to 19 mm Outer Dia.
Wall Thickness :
0.50 mm to 2.00 mm.
Working Pressure :
Upto 200 Kg/cm2 depending upon the size.
Available Colours :
Natural, White, Black, Green, Blue, Yellow, Red, Orange
Applications of High Pressure Nylon Tubings :
Salient Features Of High Pressure Nylon Tubings :
Nylon With a density of 1.04 - 1.14, it is 8 times lighter than copper tubings.
In adition to actual cost of the tubing the economic balance is even more in favour of Nylon because of elimination of Preforming connections can be simplified and easy and rapid installation.
Low O.D./I.D. ratio
YOGDEEP Nylon Tubing has substantially smaller O.D. by I.D. Ratio than any other non metalic tubing. Hence for a given I.D and working pressure, more compact tubing connection is possible.
YOGDEEP Nylon tubing remains dimensionally stable because of low moisture absorption & resistance to temperatures over a wide range of -40C to 90C (continuous) 130C (Intermittant).
It is flexible and remains elastic when bent cold, but can be permanently formed by bending when hot. The radii of curvature can be very small without cause loss of pressure.
Withstand high pressure
YOGDEEP Nylon tubing withstands high pressures depending upon wall thickness, diameter, use to which the tube is put and industry involved.
Low pressure losses
Because of smoother internal surface than that of metal tube, pressure lossed are low.
YOGDEEP Nylon tubings has excellent resistance to chemicals, solvents, oils, greases, petrol, high speed diesel, gasoline fluorocarbon refrigerants and propellants and is impermeable to Fron, Ozone and Oxygen.
By virtue of Nylon's outstanding stress cracking resistance and minimal cold flow under continuous load, end fittings are firmly and permanently attached and will not tear from its connectors.
Practically all types of end fittings marketed for use with plastics tubes and Copper and Aluminium tubes are perfectly suitable. e.g. Drive-in and compression fittings.
YOGDEEP Nylon Tubing is offered in continuous lengths or length as required or ready for installation preformed and with fittings.
Excellent resistance to :